-
2026-10-04 20:16:42
The rated voltage is 10kV, and the maximum operating voltage is 12kV.
-
2026-10-04 20:16:40
This is a three-position design that integrates closing, opening, and grounding functions, and is suitable for indoor ring main units.
-
2026-10-04 20:03:16
First, check the operation report of the integrated protection device or relay to determine whether it was an overcurrent, instantaneous, or other protection action. Then, check the corresponding lines or equipment according to the prompts.
-
2026-10-04 20:00:22
Yes, we test the products before shipping and provide a factory test report with the shipment. We also provide an electronic version of the test report.
-
2026-10-04 19:58:15
Intelligent power distribution technology can reduce charging time to 30 to 60 minutes.
-
2026-10-04 19:50:35
They are suitable for power supplies with rated voltages from 450/750V to 26/35kV.
-
2026-10-04 19:44:24
Rated voltages are 12kV, 24kV, 36kV, and 40.5kV.
-
2026-10-04 19:44:04
Yes, we test the products before shipping and provide a factory test report along with the goods. An electronic version of the test report can also be provided.
-
2026-10-04 19:40:46
Yes, we can provide test reports and a complete set of product information.
-
2026-10-04 19:40:38
We offer medium and low voltage equipment, typically up to 35kV. Alternatively, please contact us for customized solutions.
-
2026-10-04 19:39:28
The cable connector bracket is made of stainless steel, and the housing can be made of stainless steel, aluminum-zinc coated steel, or cold-rolled steel.
-
2026-10-04 19:36:03
The rated voltage can be 12kV, 24kV or 36kV.
-
2026-10-04 19:25:50
Hot melt adhesive on the inner wall firmly bonds the cables together, providing a sealed protection.
-
2026-10-04 19:10:20
This product has an IP68 protection rating, ensuring excellent waterproof and moisture-proof performance.
-
2026-10-04 19:07:15
Delivery time depends on the quantity ordered, and is usually within 7 to 30 days after receiving payment.
-
2026-10-04 18:57:46
We support non-standard customization; we can customize according to the parameters, drawings, and requirements you provide.
-
2026-10-04 18:47:51
First, disconnect the power to allow the circuit to cool down. Then, check the tightening torque of the connectors and the installation process. If any loosening or damage is found, the after-sales service will re-process the connectors and conduct an insulation test to prevent the fault from escala...
-
2026-10-04 18:47:51
We use lithium iron phosphate batteries, which are safer and have higher thermal stability than other types of lithium batteries.
ما مجموعه 40 مقالة， يتم عرض كل صفحة：18 مقالة
English
Español
Portugues
Pусский
Français
Deutsch
日本語
한국어
Italiano
Nederlands
Svenska
Polski
ไทย
Türk dili
हिन्दी
Indonesia
Tiếng Việt
עִברִית
čeština
هاتف